Industries served
Trusted across regulated healthcare and life-science markets.
Our components are found across critical medical and life-science applications where quality, traceability and repeatability are non-negotiable.
Capabilities by industry
Silicone moulding and assembly, matched to each customer type.
Every sector has different component, cleanliness and documentation requirements. Below is how CPT applies its silicone moulding, cleanroom assembly and qualitycapabilities to each target market — from small R&D projects through to high-volume production runs of millions of pieces for blue-chip customers. Select a market to expand its detail.
Surgical, interventional, respiratory and patient-interface devices demand repeatable precision and cleanroom control.
Silicone moulding
- Multi-cavity LSR moulding
- High-consistency silicone (HCR) injection
- Compression moulding for legacy elastomers
- Tight-tolerance seals, valves and membranes
Assembly & finishing
- Cleanroom assembly and sub-assembly
- Printing and marking
- Packaging within the controlled environment
- Sterilisation-ready pouching and blistering
Quality & compliance
ISO 13485:2016, ISO 8 Class K cleanroom, full batch traceability.
IVD instruments and consumables require consistent, particulate-free silicone parts produced at volume.
Silicone moulding
- High-repeatability LSR moulding
- Precision seals, gaskets and diaphragms
- Fluid-path and sampling components
- Multi-cavity tooling for high-volume consumables
Assembly & finishing
- Cleanroom assembly of consumable sets
- Visual and dimensional inspection
- Tyvek pouch and blister packaging
- Lot-coded labelling for traceability
Quality & compliance
Batch-to-batch consistency, particulate control, validated packaging workflows.
Drug handling, containment and administration systems need compliant materials and validated processes.
Silicone moulding
- Platinum-cured LSR for drug-contact parts
- HCR and compression-moulded closures
- Seals, gaskets and reservoir components
- Material selection support at inception
Assembly & finishing
- Assembly of containment and delivery sub-systems
- Custom labelling and sterilisation indicators
- Validated packaging and seal-integrity testing
- Sub-contract sterilisation coordination
Quality & compliance
Material traceability, biocompatibility focus, ISO 13485 documentation.
General healthcare applications use silicone components where patient contact, cleanliness and comfort matter.
Silicone moulding
- LSR and HCR moulding across a broad material range
- Compression moulding for elastomer variants
- Soft-touch and flexible patient-contact parts
- Custom profiles and geometries
Assembly & finishing
- Manual and semi-automated assembly
- Printing, finishing and inspection
- Packaging to customer specification
- Low-volume trial and scale-up support
Quality & compliance
ISO 13485 quality system, cleanroom options, risk-managed processes.
Laboratory automation and research instrumentation rely on precision seals and functional parts.
Silicone moulding
- Precision LSR for seals and membranes
- HCR moulding for robust elastomer parts
- Small-bore and thin-wall components
- Prototype-to-production tooling
Assembly & finishing
- Cleanroom assembly of instrument sub-systems
- Kitting and custom packaging
- Inspection and functional testing
- Rapid scale-up for product launches
Quality & compliance
Contamination control, dimensional validation, full traceability.
Analytical and laboratory instrumentation needs precision seals, membranes and functional parts with stable performance.
Silicone moulding
- High-precision LSR and HCR moulding
- Compression moulding for legacy designs
- Seals, O-rings, membranes and gaskets
- ±0.02mm typical tolerance capability
Assembly & finishing
- Cleanroom assembly of instrument components
- Printing, inspection and packaging
- Custom labelling and lot-code traceability
- Bleed dye pen and seal-integrity testing
Quality & compliance
ISO 8 Class K cleanroom, ISO 13485, documented sampling plans.
Delivery devices combine seals, valves and patient-interface parts into safe, reliable systems.
Silicone moulding
- LSR over-moulding and multi-shot capability
- HCR and LSR seals and valves
- Patient-interface components
- Reservoir and connector seals
Assembly & finishing
- Sub-assembly of device sub-systems
- Cleanroom assembly and packaging
- Sterilisation indicator and label application
- Final pouching and logistics coordination
Quality & compliance
ISO 13485, design and material control, full batch traceability.
High-reliability polymer and rubber components are supplied through fellow group member Mowtec Limited.
Silicone moulding
- Precision rubber and plastic moulding
- Compression, transfer and injection moulding
- Polymer and elastomer component manufacture
- Exacting material and process control
Assembly & finishing
- Finishing, inspection and testing
- Kitting and custom packaging
- Supply into aerospace and defence supply chains
Quality & compliance
High-reliability standards, full traceability, batch documentation.
Group capability
Aerospace & defence manufacturing
Aerospace and defence polymer moulding requirements are supported through Mowtec Limited, a fellow member of the Clinipol Holdings group. Mowtec supplies precision rubber and plastic moulded components to exacting standards for aerospace, defence and industrial customers, with capabilities that complement CPT’s medical-grade focus.
Visit Mowtec